The Stanray Wheel Truing Machine is an underfloor pit mounted milling machine, capable of simultaneously profiling both wheel of a wheel set using the axle centers as the machining reference points. The machine is capable of profiling wheel sets to necessary specifications for tape size, concentricity and plane dimensions in various situations.

 

General Specifications:

Wheel Diameter:		23 inch to 58 inch		(585mm to 1475mm)
Swing through machines:		50 Ton		(455 kN)
Swing over table:		4 ft 8.5 in (standard)		1.435M

Operating Parameters:

Diameter accuracy:		.020 in.		0.5 mm
Eccentricity:		.020 in.		0.5 mm
Profile accuracy:		.010 in.		0.25 mm
Surface finish:		200 RMS axially		150 RMS wheel circumference